磁吸门帘安装方法
Installation method of magnetic suction door curtain
1.测量
1. Measurement
门道的两侧都有空位，门道的实际宽度在每侧加大约10-20厘米。如果门口很大或在整个墙壁上制作门帘，则直接测量门口的宽度。根据门口的宽度来定使用多宽的磁吸门帘，磁吸门帘出厂宽度有30厘米宽35厘米宽40厘米宽45厘米宽50厘米宽等，能组合成任意宽度，使门帘和您的门口完美配合，不浪费。
There are spaces on both sides of the doorway. The actual width of the doorway is about 10-20cm on each side. If the door is large or a curtain is made on the whole wall, measure the width of the door directly. According to the width of the door, the width of the magnetic suction door curtain is determined. The ex factory width of the magnetic suction door curtain is 30cm wide, 35cm wide, 40cm wide, 45cm wide, 50cm wide, etc. it can be combined into any width to make the door curtain cooperate perfectly with your door without waste.
有了宽度的同时龙骨也确认了，将龙骨在门的顶端安装好就可以挂门帘了。
With the width, the keel is also confirmed. After the keel is installed at the top of the door, the door curtain can be hung.
2.高度
2. Height
通常，磁吸门帘轨道相对牢固地安装在顶部，不能安装较薄的轨道。您可以在安装之前增加高度或加固它，因此，门的高度应从坚固聚氨酯软管 PVC软管 隔离墩模具 u型槽模具 护坡模具 pvc输送带 尼龙输送带 天津除甲醛 北京除甲醛 的地方测量。
Generally, the magnetic curtain track is relatively firmly installed on the top, and a thinner track cannot be installed. You can increase the height or reinforce it before installation, so the height of the door should be measured from a firm place.
3.厚度
3. Thickness
由于磁吸门帘不需要重叠，可以自动粘贴，无缝和气密，因此请根据安装门的内部或外部进行测量。测量的尺寸为窗帘尺寸，厚度为1.5 mm，2.0 mm，2.5 mm等。通常保留窗帘底部。0.5cm-1 cm的间隙应防止窗帘滑到地面。
Since the magnetic curtain does not need to overlap and can be pasted automatically, seamless and airtight, please measure according to the inside or outside of the installed door. The measured dimensions are curtain dimensions with thickness of 1.5 mm, 2.0 mm, 2.5 mm, etc. Usually keep the bottom of the curtain. A gap of 0.5cm-1cm shall prevent the curtain from sliding to the ground.